22
Push and hold the “SET” button to enter the setting
mode. Push the
▲
/
▼
button to choose to set RX
(receiver) or TX (transmitter).
Parameter setting
When RX receiver is selected:
◎
FREQ: frequency setting
In 1MHz
Select frequency with
▲
/
▼
In 0.025MHz
Select frequency with
▲
/
▼
G: group
Select default group 1~6
CH: channel
Select default channel,
1~22 max
Select the number of frequency first in MHz and
then in 0.025MHz.
◎
Group / channel
Select the group when “G” is flashing; select the
channel when “CH” is flashing.
◎
Channel scan
SC oFF
This means the function is deactivated.
SC on
This means the function is activated
.
Scan will stop at the 1st available
channel.
This function is deactivated.
Note: this function works only in the
preset
mode.
6-
1
How to use //
6. Instructions for use