manualshive.com logo in svg

JTS MH-8990, Manual, Page: 22 / 28

Share
Download
JTS MH-8990 Manual Download Page 22

18

(8) Relieved Lock-on

Press “SET” button three sec. till“                 ” show up, then press “DOWN” button   plus “SET” 

button to store the lock-on relieved.

1. Press any button the display shows“                 ” during lock-on model.  And it will not disap-

peared either electric off.

2. Mh-8990 Press the SET button to select between frequency and sensitivity.

2-1 Frequency adjusting 

Press the UP or DOWN button to adjust the setting of a menu.

1. Hold SET button for 3 seconds to activate frequency. 

2. Once you see “MHz” blanking, you are ready to select your desired frequency by 

using UP and DOWN buttons.

3. Press the SET button again to store your changes.

2-2 Sensitivity adjusting

1. Press the SET button twice to select sensitivity. Lasting for 3 seconds at the first 

press, then 1 second for the second press, and the display appears“                   ” . 

2. Use UP and DOWN buttons to adjust changes.

3. Finally press SET button again to store your changes.            

2-3 UP button to activate “Lock mode”

Hold on to UP button for 3 seconds to activate “Lock mode”, press again to unlock. 

(Prevent accidental programming or switching off)

Mh-8990i

DOWN

UP

SET

Summary of Contents for MH-8990





























Reviews:

No comments