15
Music
INFINITY
Life
6. Operation
6-1 Set up the system
(1) Turn on the power of the receiver
Switch the “Power Switch” to “ON”. The “LCD Panel” and “REMOSET” Key
will light up.
(2) Turn on the power of the transmitter
Press the “Power Switch” . The “LCD Display” will light up.
(3) Mute Function ( for IN264TH )
After the transmitter’s power is on, short pressing the “Power Switch “
will mute the microphone. Press the “Power Switch” again will re-activate the microphone.
Notice: You have to hold the “Power Switch” for 3 seconds in order to turn off the transmitter.
(4) Install the antennas in a vertical position
6-2 Set up ID code
In order to match one receiver to only one transmitter, IN264 is designed with“ ID code”. If
and only if both ID codes of a receiver and a transmitter match each other, the “REMOSET”
function works. There are 100 ID codes available.
Receiver
(1) Press “Set” button for 3 seconds, LCD Panel will start flashing.
(2) Press “Set” twice to enter “ID Code” setting window. (Figure 2)
(3) Press “ Up ” or “ Down ” button to select a distinct ID code from “id 0” to “id 99”
(4) After setting, press “Set” again to save the settings.
23
18 26
32
5
1
6
4
Figure 2
SET
▲
▲
2
3