PS-510M
Dual Input Power Supply With Personal Mix
Thank you for choosing JTS PS-510M Dual Of Supply With Personal Mix.
In order to obtain the best efficiency, you are recommended to read this manual before using.
Case
Audio Input Socket (4P Mini XLR, Male)
Audio Output Socket (3P XLR, Male)
Volume Control
Power On / OFF / Low Batt. Indicator
Phantom / Batt. Switch
On / Mute Switch
Belt Clip
Battery Compartment
Output MIC. / Line Level Switch
Earphone Jack (3.5mm dummy stereo)
Earphone Volume Control
2
Figure 1
Figure 3
Figure 2
92
65
23
29.4
Use Instruction
Feature
．
PS-510M the Dual input power supply provides 9V
(by using a 9V battery)
/ 12
∼
48 V(by using power from the mixer)
phantom power to condenser microphones.
．
Two mini XLR (M) inputs.
．
Separate volume controls can be set independently, which make PS-510M work as a personal mixer.
．
Reliable plastic belt clip makes it easy to attach PS-510M to a belt.
．
Earphone output for musician to monitor a preferred mix.
Parts Identification
3
2
1
1
2
3
4
5
6
7
8
9
10
11
12
6
5
7
4
8
9
11
4
12
LINE
MIC.
10
Installation
(Figure 1)
1. Connect one or two microphones to the XLR inputs.
(IN L / IN R)
2. Connect the XLR output to a mixer by using an audio cable.
3. Switch MIC. / LINE switch to match the output level to the input of the
connected mixer.
Note: The earphone output will work only under battery power.
Operation
1. Insert one piece of 9V battery to the battery compartment.
2. Switch phantom / Batt. to power the PS-510M. (Figure 2)
3.
Switch On / Mute: On: Audio output enabled, earphone output disabled,
audio output disabled.
Mute: earphone output enabled.
4. Adjust the volumes of the right and left inputs to have a preferred mix. (Figure 3)
LED Indicator
LED indicator shows the On / OFF / Low Batt. status. (Figure 2)
When the LED lights up GREEN, the PS-510M is ON and the power supply is normal.
Low Batt. : LED RED
Specification
PS-510M
20~20,000 Hz
Batt. Power 9V / 12~48V Phantom Power
max. 20 mA
max. 80mA with Headphone (16Ω/32Ω)
5 k Ω
470 Ω balanced
4P Mini XLR(M) (2 channels)
3P XLR(M)
92mm(W)* 23mm(H)* 65mm(D)
Frequency Response
Power Supply
Current Consumption
Battery
Input Impedance
Output Impedance
Input Connector
Output Connector
Dimension(m/m)
