JTS CS-120 Series, Manual, Page: 41 / 56

CS-120 Conference System Product Manual
36
5-2-3 “Voice” Mode
When the system is set in “Voice” mode, the speaking indicators (speaking
lights) of all chairman units and delegate units will be on.
If the number of microphones does not reach the maximum (1/2/4):
When the participant speaks close to the microphone, the microphone
will be turned on. The microphone light ring (gooseneck light) will be on,
and the built-in speaker will be mute automatically. If the participant does
not continue to speak for 5 seconds, the microphone will be turned off
automatically, and the built-in speaker will be on. After the microphone is on,
the participant can press the speak button to turn off the microphone.
If the number of microphones reaches the maximum (1/2/4): All other
microphones cannot be turned on, unless someone turns off his/her
microphone, or other active delegate unit quits speaking state.
5-2-4 “Apply” Mode
If the number of microphones does not reach the maximum (1/2/4): When
the speak button of a delegate unit is pressed, it will produce alert sound
(Alert Sound settings in CU needs to be set as “ON”). The microphone light
ring (gooseneck light) will flicker. In the meantime, LCD of the chairman unit
will show the delegate unit ID number. The chairman can decide to approve
or reject the speaking application of the delegate unit. After the application
is approved, the microphone light ring (gooseneck light) of the delegate unit
will become red, and the delegate unit will enter into speaking state. Only
one unit can apply at the same time.
If the number of microphones reaches the maximum (1/2/4): Only one
microphone light ring (gooseneck light) of delegate unit will flicker after
the speak button is pressed, but the delegate unit ID number will not be
showed on the chairman unit, unless an active microphone is off. When the
number of active delegate units is lower than the limit, the chairman unit
can deal with the speaking applications.
Note:
All speaking modes and the limit number of active microphones can be set on CU. The
number of chairman units is not limited. A maximum of 5 microphones can be turned
on in the same system at the same time (the limit number is 4 + chairman units).
The dome cameras can track active microphones automatically (combine with video
tracking and locating application software). The video of speakers can be displayed on
big screen.