8
4. Description of parts
4-1 UHF PLL single-channel diversity receiver //
Front panel
1
3
2
5
7
Rear panel
4
8
6
100mA
12V out
Antenna A
100mA
12V out
Antenna B
12
9
10
11
9
1
4
2
5
3
6
7
8
Receiving antenna: fixed antenna
of 1/4 wave length
6.3mm phone jack: unbalanced audio output jack
3P XLR male: balanced audio output jack
DC power socket: for 12~15V DC / 300mA power supply
10
12
11
9
Power: means “ON” and means “OFF”
SET: this is for function settings. Push and hold for 2 seconds to enter the
setting mode. Push “SET” repeatedly to search for the function you wish to set.
▲
/
▼
In the setting mode, push
▲
/
▼
to change the function parameter
In the non-setting mode: push
▲
/
▼
to adjust volume
LCD display
Lock :push and hold “Lock” for 2 seconds to lock the buttons in order to
prevent pushing any button by accident.
Remoset: this allows user to synchronize the transmitter after modifying a
parameter. Push “ ” to synchronize the settings to the transmitter.
Remoset: this shows the current pairing status. It flashes rapidly when data
is being transmitted and the flashing stops when the synchronization is
completed. However, the flashing slows down if synchronization fails after a
period of time of pairing attempt.
Ultrasonic transmission unit: it transmits digital pairing data at ultrasonic
frequency. When setting, direct the ultrasonic receiving element of the micro-
phone to the ultrasonic transmitting element of the receivers. The effective
range is 30º on both sides with the optimized distance at 30cm.
