Page 24 of 43
A6PLUS software instructions
6.1 Menu navigation
1 2 3 4
5 6
1. Menu navigation
System: switch the master, input, output, debugging and view
Edit: target layer debugging and template storage
Settings: adjust console and master customizations, upgrades,
Save: save user settings
Power off: system soft power off
2. Equipment
Display the currently connected masters and visually display the card information
for each version of the master
3. Schematic diagram of master panel card
Display and configure the current master, input, MVR, output panel card.
4. Destination add and remove
Click the "Add Destination" button on the destination add and delete area of the
main interface to pop up the interface.
Adjust destination splicing - based on the total number of destination ports, for
example: the destination has 4 output ports, and there are 3 splicing modes: 1*4,
2*2, 4*1.
