JSG M2AP01, Operation & Installation Manual

Page: 4 / 20

Page 4
SPECIFICATIONS
Specifications
Ingress Protection IP66
Battery 15V 1.5Ah Lithium Manganese Dioxide with internal fuse
Battery Life Min 2 years + 6 months warning
Operating Temperature -40°C to + 70°C (Celsius)
Dimensions DIA 97mm depth 55mm (housing only)
Cable 1.1meter 10 core x 0.75mm
Buzzer 98dB @ 1 meter in free air
Outputs 3 x relay contacts @ 30V 1 Amp Max
Detection Input Max 50 meters LHD wire with 4K7 EOL resistor
Activation Output 12V 1 Amp
Fuse 5 internal fuses - LittleFuse Nano2A
Response Time Max 1 second
Failure to heed the following warnings including misuse, modifying
parts, or using worn or damaged parts may result in equipment damage
and/or serious personal injury, fire or property damage.
• Do not alter or modify any part of this equipment.
• Do not attempt to repair or disassemble the fire suppression system
while the system is pressurised.
• Always use recommended protective clothing and equipment.
• Check components regularly and replace worn or damaged parts
immediately.
• Always check equipment for proper operation before each use,
making sure safety devices are in place and operating properly.