JS Automation EMC8485, User Manual

Page: 13 / 15

12
7. System Reset
The system reset switch SW2 has provide normal system reset and reset to default functions.
7.1 Normal system reset
Push the SW2 for more than 5 seconds, the power LED will flick at 3 Hz to signal the system has
already reset. Once you release the switch, the LED will return to normal flick rate.
7.2 Reset to default
Push the switch while power on (We suggest to push the switch first then power on and wait for 3
seconds) for 3 seconds, the LED will:
1. stop flick
2. flicking at 3 Hz--- system now setting default data
3. flicking at normal speed --- system now already reset, you can release the switch.
item default value
IP 192.168.0.100
password 12345678
socket port 6936
MAC 0x02 12 34 xx xx xx
default gateway 192.168.0.1
mask 255.255.255.0
IO_config ALL input (0xFF)
polarity ALL inactive (0x0)
WDT timer 1second(0xA)
WDT output state ALL inactive (0x0)
Standalone function ALL clean (0x0)
Power on standalone Disable (0x0)
xx xx xx is serial number (Hex)