©JRI Maxant
19
b)
Start
To start your SPY RF, please press between 5 and 10”
on the button:
-
the 2 LEDs are on and flash at the same time
- all the display segments are also on
- SPY RF is now in waiting mode
Remark: If you press >10’’ => no effect => remains off
c)
Waiting mode
The SPY RF is ready to receive a configuration or to start a new recording session.
The symbol “
Halt
” is on: no measures in progress.
Use the pushbutton to start.
d)
Configuration
SPY RF configuration is done from the Sirius software (see Sirius
user manual) and then transferred into your SPY RF by radio
frequency thanks to a Spy RF ModeM.
e)
Measurement start
The SPY RF has 2 starting mode:
automatic start
manual start
f)
Automatic start
Your SPY RF starts recording:
automatically when the configuration is transferred,
It displays the temperature in °C degrees, channel number, measurement unit and memory
status.
The green LED flashes every minute.
The temperature, threshold indicator, channel number and a red LED flashes every 15 sec in
case the threshold limit is overpassed.
+
Working LED (green):
2’’ => starting measurements
then flashes every 1 minute