JRI Nano SPY, User Manual

Page: 4 / 13

©JRI 4
• A solid metal wall will not allow transmission by radio. A perforated metal wall will allow waves
to pass while attenuating them.
b) Positioning
•
The Nano SPY units can be placed either inside or outside the enclosures.
• For installations outside the enclosure, mount the units sufficiently high on the walls to avoid
interference with obstacles and foot traffic.
•
Insofar as is possible, place the Nano SPY LINK in a central position relative to the measurement
points.
• Try to place them in locations where they are visible
•
Never place the Nano SPY unit horizontally.
•
If difficulties persist it is possible to use Nano SPY ALARMs (repeaters) or connect to another
Nano SPY LINK on the Ethernet network.
To ensure your safety during installation or an intervention on a device placed in a high
position, use proper equipment which is in good condition and provides adequate
stability, wear appropriate, non-slip shoes and install warning signs around the work area
if the intervention takes place in an area of foot traffic.
III.
PRODUCT DESCRIPTION
a) Control unit
b) Mounting
The Nano SPY can be mounted in 2 different ways
•
Using a tie wrap to attach it to the monitored product
• Magnetically
The Nano SPY has 2 internal magnets for easy mounting on metallic surfaces. A protective shell
is available as an option (Ref: 12715)
Modèle T1/TH
Model T2/T3
Status LED
Touch-sensitive
button
Battery access
(All models)
Identification ring
(All models)
To sensor
Mounting eyelets
(All models)
Mounting eyelets
(All models)
Protective shell
Magnets