14/17
（１１）
In the unlikely event that foreign matter such as water or metal enters inside,
please unplug the power cable and contact us. If used as it is, it may cause fire,
electric shock or breakdown.
（１２）
Clean the surface to remove dust and dust, and wipe it with a clean cloth.
（１３）
This device may not be able to communicate due to communication carrier interference
or radio environment due to the use of radio waves.
For GPS positioning, time may vary depending on location and time of day, or
positioning may not be possible.
In addition, some environments may experience significant errors.
9.3. Implementation notes
（１）
Be careful of static electricity when handling this equipment. It may break down due
to static electricity. Be especially careful of static electricity to the external
connector.
（２）
Connect and disconnect cables (connectors) with external power supply cut off. It may
cause fire, electric shock or failure. Please avoid parallel and insert in parallel.
（３）
Be careful not to touch the terminals of the external connector with bare hands or oil
hands.
（４）
Do not use or leave it in direct sunlight or high temperature places.
It may cause heat generation, deformation, or malfunction of the equipment.
（５）
Please install the main body and cable so as not to interfere with the operation of
equipment such as operation and air bag.
（６）
Connect the cables (connectors) securely and fix them. It may cause the cable to
Come off or the connector to be damaged.
（７）
Do not install near high-voltage transmission lines or transformers or other equipment
that generates magnetic fields. The device may not operate properly.
9.4. Overcurrent protection
（１）
This device does not contain a fuse for overcurrent protection.
To prevent danger, use the overcurrent protection fuse for the power supply line.
9.5. Storage Notes
（１）
Avoid places where there are many corrosive gases such as salt wind, chlorine, hydrogen
sulfide, ammonia, sulfur oxides, hydrogen chloride, and bisulfite gas.
（２）
In places where there is a sudden change in temperature and humidity, dew condensation
will occur on the whole device, so please avoid such an environment and store it in a
place where there is little change in temperature.
（３）
Do not place it on an unstable place such as a wobbly table or a leaning place. It may
fall and cause malfunction or injury.
（４）
Do not store in humid or dusty places. It may cause overheating, fire, or malfunction.
9.6. Transportation method
（１）
Do not throw or drop it. The set of equipment may be broken.
（２）
Do not get wet with water. Please be careful not to get wet during
Transportation during rainfall.
9.7. Disposal
（１）
Disposal of this equipment will be handled by our company and discarded.
Therefore, if there is a need for disposal due to aging, breakdown etc. of the
Equipment. please contact our sales department, local branch office, branch office or
business office.
（２）
Do not throw batteries into fire, explosion could result in fire or injury.
