JRC JMR-5410-4X Instruction Manual Download Page 109

Page: 109 / 688

2-13

Section 2 Name and Function of Each Unit

APP A

APP B

2.2.9 Navigation tools

The tools that are used for measurement are displayed.

2.2.10 Range and mode information

Range scale combo box

Set the observation range.

For the details, refer to "5.3.2

Changing the observation

range".

Motion mode combo box

Set the motion mode.

For the details, refer to "5.4.6

Setting a motion mode".

Bearing mode combo box

Set the bearing mode.

For the details, refer to "5.4.5 Setting the azimuth mode".

Stabilisation mode combo box

Set the stabilisation mode.

For the details, refer to "5.4.7 Setting the

stabilisation mode".

[Out] (Reduce) button

Whenever this button is clicked on,

the screen image is zoomed out by

one level from the current range

scale.

When this button is held down, the

image is zoomed out continuously.

[In] (Expand) button

Whenever this button is clicked on, the

screen image is zoomed in by one

level from the current range scale.

When this button is held down, the

image is zoomed in continuously.

Range rings display button

Use this button to switch range rings to

On/Off.

For the details, refer to "4.4 Using the

Range Rings".

[Off Centre] button

Use this button to set Off Centre to

On/Off for the display position of the

own ship’s position (CCRP).

For the details, refer to "5.4.8 Moving

own ship’s display position (Off

Centre)".

[PI] button

Use this button to operate the parallel index line

cursor.

For the details, refer to "4.6 Using Parallel Index

Lines (PI)".

Cursor information display area

When the cursor is set on a target, the cursor information is displayed.

For the details, refer to "4.3 Using the Cross-hair Cursor".

EBL/VRM operation button area

Use this button to operate EBL/VRM.

For the details, refer to "4.5.1 Measuring a

range and a bearing with EBL and VRM"

[PI Reset] button

Effective only in the All mode that sets all

the parallel index lines concurrently.

When this button is clicked on, all the

parallel index lines are set parallel to the

heading of own ship.

For the details of the All mode, refer to

"4.6.3 Setting all the parallel index lines

concurrently (All mode)".

Summary of Contents for JMR-5410-4X

















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for JMR-5410-4X

Reviews:

Related manuals for JMR-5410-4X

Brands by name

Popular brands

JRC JMR-5410-4X, Instruction Manual

Search results

Summary of Contents for JMR-5410-4X

Reviews:

Related manuals for JMR-5410-4X

Brands by name

Popular brands