JRC JMA-7122-6XA, Installation Manual, Page: 138 / 316

4 － 10
JMA-9100/7100 Installation Manual > 4.INITIAL SETTING > 4.5 NAVIGATOR SETTING
4.5
NAVIGATOR SETTING
Set ON or OFF to indicate whether a navigator is connected to this apparatus or
not. Only the navigator set at ON can be used.
Procedures
1) Open the [Service Man Menu] screen.
2) Open the [3.Device Installation] screen according to the operation shown
below.
3) Set ON when a navigator is connected, and set OFF when a navigator is not
connected.
2. Installation Menu
→
9. Next
→
3. Device Installation
Gyro
：
Gyro (via gyro interface)
Compass
：
Compass (IEC61162 specification)
GPS Compass
：
GPS compass made by JRC
LOG
：
Log (via gyro interface)
2AXW
：
Log over water (IEC61162 specification)
2AXG
：
Log over ground (IEC61162 specification)
GPS
：
GPS(IEC61162 specification)