JRC JMA-2353 Instruction Manual Download Page 78

Page: 78 / 210

Chapter 2

OPERATIONS

2.7

SOFT KEY OPERATION

2-44

2.7.7

DISPLAYING THE RADAR ALARM AND AUTOMATIC
ACQUISITION OPERATIONS

With a fan-shaped range made, the radar alarm can give an alarm to ships that enter or
depart from the range.

Reference:

"Alarm2" is initially set to off. To use this function, set this to on by referring to "

■

Soft Key

Menu Setting" in "4.10 Control" of the Installation Manual.

Select Alarm1 Alarm2 on the soft key menu.

The soft key menu disappears and "Make Zone" of the soft key display is
color-inverted.
"Alarm1" is activated.

The soft key menu disappears and "Make Zone" of the soft key display is
color-inverted.
"Alarm2" is activated.

"Alarm1" is color-inverted.

"Alarm2" is color-inverted.

Summary of Contents for JMA-2353



















































































































































































































Search results

Summary of Contents for JMA-2353

Reviews:

Brands by name

Popular brands

JRC JMA-2353, Instruction Manual

Search results

Summary of Contents for JMA-2353

Reviews:

Brands by name

Popular brands