JRC JFC-7050, Operation Manual

Page: 34 / 49

- 31 -
Operation
10.2.2.2. Arrival Range
It is to adjust the range of arrival from your waypoint. If you have a route, it changes to the next
waypoint automatically.
( The default setting is 0.05nm.)
10.2.2.3. XTE Alarm
If you are out of the course, it gives you a notice with alarm.
( The default setting is Off.)
10.2.2.4. XTE Range
It is to adjust the range of the off course.
( The default setting is 0.25nm.)
10.2.3. Navigating Stop
Stops the present navigation.
10.2.4. Save WPT
You can save the WPT in SD card.
10.2.5. Load WPT
You can load the WPT from SD card.
10.3. Recording
This is the function of recording current screen.
Marked [ ● REC] in red color on the upper right on the data bar during recording.
Note: The recording file is stored in external memory cards, SD memory. Check SD memory in the
JFC-7050.
(* Recording time is different by the size of the memory card)
10.4. Recording List
Available to display and delete the recording file
10.5. Screen Capture
This is the function of Screen Capture.
Note: The recording file is stored in external memory cards, SD memory. Check SD memory in the
JFC-7050.