JRC JCY-1700, Instruction Manual

Page: 5 / 114

Notes on Using
Playback Software / Instruction Manual
iii
< Notes on Using >
Do not disassemble or remodel this equipment.
Such action may cause fire, electric shock, or an equipment fault.
Do not use any AC/DC adaptor other than attachment.
Such action may cause fire, electric shock, or an equipment fault.
Do not use any power supply voltage other than the specified voltages.
Such action may cause fire, electric shock, or an equipment fault.
Do not use any battery other than specification.
Such action may cause burst of a battery by liquid leak, fire, or injury.
Do not put containers into which it went, such as water, or a small metal thing on this
equipment top or near.
When water enters or a metal thing falls into the equipment, it becomes the cause of a fire, an
electric shock, and failure.
Do not damage a power cord or process it.
If put a heavy thing, heat, it pulls or it bends by force, a power cord will be damaged and it
may become the cause of fire and electric shock.
When a fault occurs, turn off the power supply of this equipment, remove the plug, and
contact the Sales Department of Japan Radio Company, nearest branch company, branch
office, sales office, or our agent.
Continuous use may cause fire or electric shock.
Do not check or repair the inside of the equipment by yourself.
Checking or repair by anyone other than the specialist maintenance staff may cause fire or
electric shock.
Request checking or repair of the inside of the equipment to the sales Department of Japan
Radio Company, nearest branch company, branch office, sales office, or our agent.