JRC JAX-9B -, Installation Manual

Page: 32 / 68

2. Installation
JAX-9B W-FAX Installation Manual
18
7ZPNA4095
2.6. Display received image on PC (Option)
The received (recorded) image is displayed on the PC by this optional function.
2.6.1. Option Kit
For displaying the received image on the PC, it is necessary to add the following option kits to JAX-9B.
*1 The Communication I/F unit is used to convert the outputted serial data from JAX-9B into the USB-I/F
data.
• The PC is required to have a USB 2.0 interface port.
• The Communication I/F unit is installed near the PC because the length of the attached USB
cable is one meter.
*2 The PC interface kit is a common kit of "displaying the received image on the PC" and "Remote
Maintenance System".
2.6.2. Setting Up
• For performing the optional function, it is unnecessary to operate JAX-9B.
The optional function is performed only by connecting the option kits and a PC to JAX-9B.
• The image transmitted to the PC is the image being recorded on JAX-9B.
If the image does not need to be recorded, remove the recording paper roll from JAX-9B. Then,
JAX-9B will not record because there is no paper, but will transmit the received image to PC.
2.6.3. Software for the PC
The main functions of the PC software are to display the received images transmitted from JAX-9B and to
store the images in an image file. For the detail of the PC software, refer to the Instruction Manual for
Optional Software of a separate volume.
●
OS of the PC: Windows 2000/Xp (Vista (on schedule))
1 PC Interface kit *2 7ZZNA4016
Terminal Block (TB103) for connecting PC
Cable clamp
2 FAX image display kit 7ZZNA4017
PC software for displaying image
Communication I/F Unit *1