JRC Alphatron Marine AlphaPhone 100 AS Installation And Operation Manual Download Page 9

3 Telephone Operation

3.1 Phone Setting

For adjusting the phone perform the following actions:

At the on-hook or off-hook state, press OK key to start the setting mode.

The LCD will display: VIEWMENU 

↓↑.

 Use the UP or DOWN key to select among different items.

When you want to choose one item, press OK key again to go to the setting.

After you have finished with this item, press OK key again to confirm and/or to move to another item.

To change items, always use UP or DOWN keys.

If you want to quit the setting mode at any time, press C key.

The settings of different items are shown in detail as follows:

3.1.1 Change Language

To change the language setting perform the following actions:

When the LCD displays SELECT LANGUAGE , press OK key once.

LCD will show English (default setting).

Use UP or DOWN key to select among the languages for English / Dutch / French / German.

3.1.2 Change Date/Time

To change the date and/or time, perform the following actions:

When the LCD displays: DATE/TIME , press OK key once.

The year digits will flash.

Use UP or DOWN key to change the year (Step is 1), then press OK key to confirm, and move to the setting of the
hour.

Repeat this operation to set the minute, day and month by turn.

The LCD will automatically display the corresponding day of the week.

If a FSK format caller ID signal is received, the current month, date and time display will be updated (while the year
remains unchanged).

3.1.3 Change LCD Contrast

To change the display contrast, perform the following actions:

When the LCD displays: CONTRAST ADJUST , press OK key.

Use UP or DOWN key to select among 5 different contrast levels the one that you prefer.

Note  The default setting is 3.

3.1.4 Set Flash

To adjust the flash setting, perform the following actions:

When the LCD displays SET FLASH , press OK key.

Use UP or DOWN key to select the flash time: 100ms, 120ms, 300ms, 600ms.

Press OK key to confirm, or C key to exit.

9  |  Telephone Operation

Summary of Contents for Alphatron Marine AlphaPhone 100 AS




















Reviews: