17 | Installation and Mounting
Figure 3: LT-3110 Control Unit (backside view)
The LT-3110 Control Unit user interface, display and buttons, are described in User Interface (UI) on
page 32.
NOTE
The LT-3110 Control Unit must be mounted as Console Mount or Bulkhead.
Mounting and installation considerations:
For optimum system performance, some guidelines on where to install or mount the LT-3110 Control
Unit must be followed. It is recommended to mount the unit in a location, which fulfils these
requirements:
•
Mount the unit indoor (not exposed to direct water)
•
Mount the unit using the supplied material
•
Mount the unit on a rigid structure with a minimum of exposure to vibration and shock
•
Mount the unit in an area with an ambient temperature between -15°C to +55°C (+5°F to
+131°F)
Summary of Contents for Alphatron LT-3100 Iridium
