This product shall feed the exact input voltage to the servo operating voltage.
Be sure to use the specified voltage on the servos.
Serial bus adapter
Serial Bus channel shall
be decided by the
program on the
transmitter
PWM servo require
to use separate sold
PWM converter on
XBus serial connection.
XBus servo shall activate depending
on the designated
ID channels.
Diagram showing the connection of XBus receiver and Barvarian Demon's "CORTEX PRO"
Insert Lead Harness "B" connector to CORTEX PRO on port "A and "B" from XBus receivers.
Note: Port "B" is the primary port on single serial Bus connection.
Insert the Serial Bus adapter's connector to PDX16 from CORTEX PRO terminal 5 and 6.
PDX16 shall output XBus Serial signals on all the servo output port.
Note: Failsafe function must be set at CORTEX PRO
RECEIVER
【
1
】
XBUS
OUTPUT
RECEIVER
【
2
】
XBUS
OUTPUT
Bus signal
output to
the Port 9-16
Bus signal
output to
the Port 1-8
CONNECTION
DIAGRAM-3
Be sure to check the polarity before
actual insertion of the connectors.
Single battery connection
shall supply power to
both receiver connector
terminals.
Negative terminal (
−
)
Positive terminal (
＋
)
Signal terminal
6 5
4 3 2 1 D C
B A
Serial bus adapter 2
Serial bus adapter 1
−
terminal
＋
terminal
Signal terminal
※For further detail on CORTEX PRO,
refer to their own manual on their
web site.
https://www.bavariandemon.com/
* Be sure to check the
polarity on connector.
* Be sure to check the
polarity on connector.
* Port "B" is the primary
serial Bus port
