11
Operating controls
Operation of Control Panel
Referring to Fig 10.
1.
Emergency stop switch
Press down the Emergency switch to stop all of
machine function if any unsafely situation occurred.
2.
Stop power button
O: Press to disconnect the power of motor.
3.
Power on button
I: Press to connect the power of motor
4. Blade speed
adjusting
knob
Variable blade speed is controlled by the knob.
Turn knob clockwise to increase speed from 35
to 85 MPM. Turn knob counter clockwise to
decrease blade speed.
5.
Cutting mode selection
Switch
There is two cutting modes and neutral position can
be selected. Select any cutting mode the power
should be cut by the neutral position.
Manual mode.
Hydraulic flow controlled descend mode.
Turn switch left for hydraulic controlled descend
mode and right for manual mode.
6.
Coolant ON/OFF Switch
I: Turn on the coolant
O: Turn off the coolant
7. Saw Arm Descend Valve
Control saw bow descent speed
Fig. 9
P
Q
Fig. 10
7
1
2
3
5
4
6
