ARA-1 Operations Manual
3-8
INTEROPERABILITY NOW
3.3
Configuration Details: Radio Interface
Figure 3-5
Radio Settings Page
Included on the
Radio Settings
page (shown in Figure 3-5) are all the settings that affect the
interface to, and operation of, the radio cabled to the ARA-1. This page is used to configure and
optimize the unit for best performance in a particular radio application. Each of the settings is
explained in this section; the default settings are shown in Figure 3-5.
Please see also Section 1.8 “COR & PTT Signaling in the SIP Environment.”
3.3.1
Radio COR Settings Options
The ARA-1 must know when its associated radio is receiving a valid signal; it uses this to
determine when it should send whatever audio is present on the radio’s receive audio output lines
across the SIP network. The Radio COR settings all ensure that this function is optimized.