5
Instructions to inflate your board:
3
- Connect the
pump hose to the
valve, insert and
rotate it to the
right
1
- Carefully roll out
the board
2
- Pull the valve pin
counter-clockwise
and up
5
- Turn from
double action
to single action
when it is
difficult to pump
4
- Keep
your feet
firmly on
the foot
r e s t s
and start
pumping
6
- Pump your
board to 15 psi
(1 bar)
Any use of an air compressor may
result in poor performance or damage
to the board, and automatically avoids
all warranties. If you leave your board
exposed to the hot sun, check the
pressure and deflate it slightly. Otherwise
the board may become over inflated
and stretch the material. The ambient
temperature affects the tube’s internal
pressure: a variation of 1°C/ 1.8°F
causes a variation of the pressure in the
tube of +/- 4 mBar (0.06psi).
Warning
usermanual2017 - Magicair and Explorair.indd 5
3/16/2017 10:32:09