6
Transmitter introduction
Steering reverse switch
Steering trim-right
Steering trim-left
Throttle trim-brake
Throttle trim-forward
Steering traveling angle-right
Steering traveling angle-left
Power indicator
Power switch
1. Always turn the power “ON” to the transmitter
before connecting the batteries with the ESC.
2. Plug the battery into the ESC plugs and listen
for three continuous >Be<>Be<>Be< . (Signal
noise of auto etected ESC)
3. Pull the throttle & motor rotate in anticlockwise direction,
your motor is now armed and ready for operation.
4. Check the direction of the rudder, the trailing edge
of the rudder should turn right when right input is
given. Conversely, when left input is given, the trailing
edge of the rudder should turn left.
