- 2 -
electric shock or short circuit. If the power cord is damaged, you must go to
Jiuyang After-sales Service Department to purchase the special power cord for
replacement.
Do not fill hot water above 70
℃
to make pulp, so as not to affect the taste or cause
pulverized bad slurry overflow and other anomalies.
Please do not drink until the pulping is finished. Drinking undercooked soy milk
can be harmful to the human body.
Do not overflow the head or cup into the liquid. Do not spray the head, vent holes,
strong electrical couplers, power sockets, and do not water the bottom of the cup.
If water enters, pause and use again to avoid short circuit or electric shock
Care should be taken of children to ensure that they are not likely to play with or
approach the product in order to avoid personal injury from scald or misoperation.
Use this product only with experienced guardians or coaches who have abnormal
or no independent capacity.
Please make sure that the local power supply is in accordance with the marked
power supply of the product before use, otherwise the product will be damaged or
fire will occur.
Operate on a stable horizontal table and stay away from the green side of the table
to prevent falls. Do not use this product under or near the curtains and other
combustible materials (e.g. under the wall), otherwise it may cause the fire engine
head to buckle vertically onto the cup body and the power cord to be inserted into
the power outlet. Make sure that it is installed in place to prevent loosening, power
failure or overheating.
When the product is working, keep a certain distance from the charged object such
as the socket, so that the plug is in the accessible range and away from the easily
explosive object. At the same time, the grounding wire of the power socket must
be kept in good grounding.
After the product starts to work, if any other abnormality occurs in case of power
failure, please pay attention to the replacement of food ingredients and
remanufacture, otherwise it will cause overflow of paste bottom slurry, alarm and
other faults.
After the production, please cut off the power first, remove the machine head and
pour the slurry again. Slide off the machine head or splash out the drink, causing
