3
Filter time
When the control system is set as timing
water cycle mode, its on/off and time period
setting methods is the same with timing
heating.
Temperature unit
In Set of the menu, press“ ”and“ ”
to move the cursor to Temp Unit. Then press
“ ”. Temerpature unit can be set as
℃
or
℉
.
Manual C.pump
When the manual cycle pump function is started, there will be a cycle pump icon
“ ”added in the function operation interface. Users can manually start
cycle pump in the home interface. When the manual cycle pump function is
turned off, this icon will disappear.
CPump
Mode
PB553 control panel have four different
modes. They can be stored and selected with
navigation keys.
How to store the setting: In Set-> Mode of
the menu, press “ ”and “ ”to
move the cursor to the items need to be
saved then press“ ”. If the square on
the right side of the item is solid, then it indicates the current mode is stored.
Mode of jet(pump), blower, ozone, heat, and brightness can be stored.
How to select the mode stored: In the main interface, press “ ” a nd “ ”to
move the cursor to “ ”. Then press “ ”in turn to select the stored
the modes. Modes of PB553 control panel can be selected by short-cut key
“ ”. Note: please pre-set mode function before use it the first time.
4
Auto lock
In the Set of menu, press “ ”and “ ”to move the cursor to “Auto
Lock”. Then press
“ ”to set the lock starting time as “off”, “30S”, “1 min” and “3 min”.
When set as off, the lock function is turned off. When the lock is started, press
continuously “ ”for 3S. When “Auto Lock” disappears from the screen, the
auto lock function is disabled.
Mode