Joyolight CON-WH-1Z, User Manual

Page: 4 / 4

Five-year warranty
Contact us for complete terms
and conditions.
Joyolight reserves the rights change our products and specifications
at anytime without prior notice and such modification shall be effective
immediately. Contact Joyolight for the latest product information.
JOYOLIGHT GROUP INC.
#12, 5200 Dixie road
Mississauga, ON, L4W 1E4
www.joyolight.ca
sales@joyolight.com
1-877-849-1942 (US)
647-496-8107 (CA)
INS 2022-05
CON-WH-1Z
Restoring factory settings
of remote control0
1. Press and hold “ B “ key for 20 sec until the indicator of re-
mote control process the state as 100%-off-100%.
2. Press “ D “ to submit and finish the operation.
The indicator of the remote control will flash three times after
successful operation.
Linking & Unlink
Linking
Unlinking
Connecting the load to
the receiver and power
on it.
1. It is necessary to clear
the code if the receiver was
coded before.
2. Batch operation can be
performed within the remote
control range.
3. Please remember to cut
off other un-code zones’
power, or they will be paired
together.
It will also automatically exit
code transmission status
after 60 sec.
Connecting the load to
the receiver and power
on it.
1. The clearing operation
should be finished within 1
minute after the receiver is
2. Batch operation can be
performed within the remote
control range.
Press and hold “ C “ on the
remote control for 5 sec .
The indicator of the remote
control will flash quickly.
Matching coding finishes when
you see the load light flashes
3 times and return to the initial
state.
Press and hold “ D “ on the
remote control for 5 sec .
Matching coding finishes when
The load light flashes 3 times
Press any key to exit and
end the operation.
It will also automatically exit
code transmission status
after 60 sec.
Press any key to exit and
end the operation.
It will also automatically exit
code transmission status
after 60 sec.
Code learning operation
between remote controls:
Used to unify system code values or copy a new remote con-
trol. Since each remote control has its own unique RF code at
the time of delivery, when there are multiple remote controls
in one system, one of them must be selected as a main, and
others should copy its RF code.
1. Main remote control: Press and hold “ C “ key for 5 sec .
The indicator of the remote control will flash quickly.
That means it enters the pairing mode
2. New remote control: Press and hold “ B “ key for 5 sec .
The indicator will turn from 100% to off means it enters
learning code status.
3. The indicator of the new remote control will flash
three times after successful code learning.
Remote control RF code
learning from controllers
1.Turn off the power supply of the controllers.
2.Press and hold “ B “ for 5 sec until the indicator of remote
control turns off.
3.Turn on the power supply of controllers. The indicator of the
remote control will flash three times after successful code
learning.
Note: The distance from controllers to remote controls
should be less than 2m.