Joyner JNSZ800MVA, Owner'S Manual

Page: 25 / 222

9.OPERATION INSTRUCTION
WARNING-Do not attempts to start or operate the engine until completely familiar with the location
and use of each control necessary to operate this vehicle. Operator must know how to stop this
machine before starting and driving it.
Control pedal
Accelerator Pedal:
Changes engine rpm and vehicle ground speed. Press down on the
accelerator pedal with your foot to increase speed and let up on the pedal to decrease speed. (See
figure 1)
Each time prior to starting the engine, check the throttle assembly to ensure that
when pedal is pushed all the way forward the assembly is working smoothly and
returns to idle when released. Do not operate if pedal or engine throttles linkage fail to
return to idle. If unable to correct the problem through lubrication, adjustment or
replacement of worn parts, contact your dealer for assistance.
Brake Pedal:
Applying pressure to the brake pedal instead of the accelerator pedal with your
foot will slow down and/or stop the vehicle. Riding or resting your foot on the pedal unnecessary will
wear the brakes out prematurely. (See figure 1)
Clutch Pedal:
Applying pressure to the clutch pedal with your left foot will make gearbox to
declutch and let up the pedal to clutch. (See figure 1)
Park brake lever and shift selector
Park Brake Lever
:
Sets and releases the park brakes. Do not drive vehicle with park brake
lever set.
(See figure 2)
• Set park brakes: pull-up on the park brake lever until the lever is tight.
• Release park brakes: Pull-up on the park brake lever, depress the release button and push the
lever
Shift Selector
:
Changes trans-axle gears from neutral to forward or reverse. Always start
engine in neutral.
(See figure 3)
• Pull up on shift selector collar and move lever to position “1” “2” “3” “4”, the vehicle will move
forwards at different speed.
Accelerator Pedal
Brake Pedal Clutch Pedal
FIGURE 1