Joyner JNSZ650DLB, Owner'S Manual And Parts Manual, Page: 130 / 146

Attach tie rod and front whees
3
3 1
for
wa
rd
1. Install the shaft of outer tie rod end-1 to stub axle,R
from the underside (nut on top).
2. Install flat washer,spring washer then tighen nut.
Note: don't adjust outer tie rod end as wheel alignment is done before packing.
3. Attach the wheel(27*8-12),FR-2 on the hub, tighten the nuts.
4. Attach the wheel(27*8-12),FL-3 as described above .
Attach tie rod end and front wheel
Q'ty Description
code name
2 1
1
1
tie rod end
2
1
D650.05.01.03.00
stub axle,R
tie rod end
S650.03.01.04.00A right wheel(27*8-12)
left wheel(27*8-12) S650.03.01.01.00A 02.S650.03.01.01A
02.S650.03.01.04A
02.D650.05.01.03
Erp code No.