1. Loosen the nut of the distributor housing
2. Turn the distributor slowly. Increase the spark timing by counterclockwise turn.
Decrease the spark timing by clockwise turn.
F. Front Wheel Alignment
a.
Put the vehicle on level ground.
b. The “toe-in” of the front wheels should be 1.18 inches. To check for alignment,
measure distance A and B between the centerline (CL) of the wheels. The proper
toe-in dimension A should be 1.18 inches greater than dimension B.
c. To adjust the alignments, loose the lock nuts on both sides of Front Tie Rods. To
make Dimension B smaller, turn the rod to the left. Turn the rod to the right to make
Dimension B larger. After adjusted to desired length, tighten the lock nut against the
rod end. Recheck the dimensions for proper alignment.
PERIODICAL CHECK AND SERVICES
The maintenance intervals in the following table are based upon average driving
conditions. Driving in unusually dusty areas, require more frequent servicing.
Time of service
Item
Initial
service
Monthly Quarterly Yearly
Engine
1. Fan, driven belt
I I R
2. Tighten bolts on engine.
I
I
3. Engine oil
I
I
4. Coolant
I
5. Coolant hose and joints
I
I
R
6. Exhaust
I
I
7. Transmission oil
I
R
Ignition
8. Coil
I
9. Distributor for ignition
I
10. Air cleaner
C I
36
Summary of Contents for Go-kart JNSZ650DS
Page 39: ...38...