Joyello JL-972, Manual

Page: 8 / 40

8
1 - Nebuliser power button (high/medium/low spray)
2 - Button for negative ions emission
3 - Night light
- Connect supply cord to power outlet (220-240V /50Hz) wait a few seconds and the water will reach the base.
Press the nebuliser power button for 2 seconds to activate the humidifier.
- When the humidifier is running the blue light is on. The red light indicates that water must be added.
- Press the nebuliser power switch to set the 3 levels of output/steam intensity: high/medium/low
- Press the button number 2 to activate the emission of negative ions
- The red indicator light on the nebuliser switch will turn on when the water runs out, before adding water remove
the plug from power outlet.
HOW THE IONIZER WORKS
The air we breathe is charged with electrical energy, so is rich in positive (+) and negative (-) ions. Our wellbeing depends on the
perfect balance of the two. Many devices in the home (computers, air conditioners, some electrical appliances and even cigarette
smoke and insufficient ventilation) cause an increase in positive ions and therefore create unbalance (more positive than negative
ions in the air). The function of the ionizer is to fill the air with negative ions (particles with a negative electrical charge) to restore
that lost balance. These particles attach themselves onto any impurities in the air, as all particles such as bacteria, dust, smoke,
etc., have a positive charge, and neutralize these, precipitating them. Medical research has proven the beneficial nature of
negative ions on our psychological and physical wellbeing, with the benefits to the respiratory system and stress relieving effects
of purer air. For this reason, ionizers are now used more than ever not only in the home, especially for the health of children, but
also in hospitals, gyms and other public places.
TECHNICAL DATA
Standard output: 300ml/h
Tank capacity: 3 Litres
Voltage: 220-240V
Frequency: 50 Hz
Power: 25W
CLEANING AND CARE
1 - Always turn the switch OFF and unplug before cleaning the appliance.
2 - After each use, rinse the tank and tank cap. Clean the product exterior with a cloth dampened with water, at a temperature
below 40°C. Always clean and dry the humidifier before placing it back in the box (once a week), and store it away.
Empty the tank and clean the appliance when not used over a period of time.
3 - Clean tank and atomiser once a week: if there are residues in the tank, add citric acid and clean with a slightly abrasive sponge,
and lastly with tap water.