8
9
Never immerse the device in water and
never store it in damp places. If the
device is dropped into water NEVER TRY
TO RECOVER IT.
SPECIAL WARNINGS FOR USING UNIT
Use original components and accessories only. Do not use the unit on or around
wounds or skin rashes. Treatments must be pleasant and relaxing. If any skin
irritation, pain or discomfort appears, interrupt usage immediately. To avoid
irritations caused by excessive pressure of the unit on skin, thereby preventing
excessive exfoliation, this product is equipped with an auto-off feature if too much
pressure is applied.
INSERTING PREPLACEMENT BATTERIES
Open the battery compartment and insert the batteries into the battery
compartment, in the direction of the polarities indicated. Close the battery
compartment. The supplied batteries are for trial use only and they may have a
shorter life (2x1,5 AA). Replace dead batteries with new ones.
Note:
Do not mix new batteries with old batteries. Always use batteries of the same
type. Remove batteries if device is not used for a long period of time.
HOW TO USE THE UNIT
This small, practical accessory allows for a perfect pedicure, eliminating calluses and
corns; for perfect feet in just a few minutes, with any type of footwear.
Easy to use: simply insert the desired accessory and press the button. The rotation
of the heads eliminates callous tissue, leaving skin feeling soft and smooth. It is
advisable to soak feet in water before the treatment. Insert the batteries in the
housing at the rear of the unit, paying attention to the polarities indicated. It is
advisable to remove the batteries if the unit is not used for an extended period of
time, since possible leaks may compromise the unit’s correct operation. Apply the
desired accessory. The unit is equipped with 4 interchangeable attachments to be
used based on the required function and type of skin being treated. To insert the
required accessory, apply it by pushing downwards; to remove it, pull upwards.
Important: the unit must always be switched off when inserting or removing the
accessories. To switch on the unit, simply push the switch up and select the desired
speed setting (low - high). To switch off the unit, push the switch to the OFF position.
