Joycare JC-339M, Instructions Manual

Page: 12 / 56

12 13
REPLACEMENT HEADS
Constant use will wear out the heads (brushes, sponges and massage head)
which periodically (after about 3 months of continuous use) must be replaced.
The 4 different heads can be purchased as spare parts, under Product code
JC-359.
CLEANING AND MAINTENANCE
Clean the product and heads after each use.
Cleaning the device:
Before cleaning turn off the device and remove the head
used. Never immerse the device in water or other liquids. Clean with a soft cloth
dampened with water and dry with care.
Cleaning the heads (brushes, sponge and massage head): Before cleaning
the heads, these should always be removed from the device. Wash the heads
with warm water and mild soap, remove excess water with a soft, clean, dry
cloth. Always let the accessories dry completely before storing.
DO NOT use abrasive cleaners or chemicals to clean the device and accessories.
DO NOT wash in dishwasher. Do not clean the accessories with very hot water
(maximum 40°C).
This article has been designed and manufactured in compliance with
all applicable European directives.
DISPOSAL
The device, including its removable parts and accessories, at the end
of its useful life should not be disposed of with household waste but
in accordance with European Directive. Since it must be treated separately
from household waste, it must be taken to a collection point for electrical and
electronic equipment, or returned to the retailer when purchasing similar new
devices. Severe penalties will be applied in case of transgression.
The batteries used with this product, at the end of their useful life, should be
disposed of in special containers.
Operation use conditions:Room temperature: from 10°C to 40°C.
Relative humidity: from 30% to 75% without condensation. Pressure: from
700 – 1060 hPa.
Environmental transportation and storage conditions:
Temperature:
from 10 to 40°C. Humidity: from 5 to 95%. Pressure: from 700 – 1060 hPa.
All details and drawings are based on the latest information available at the time of printing
and may be subject to change.