joyami JDS010, Instructions Manual

Page: 3 / 10

Product Description
Kettle Body
ON/OFF Switch
Handle
Lid
Power Base Power Plug
joyami Transparent Electric Kettle is for home use ONLY.
The illustrations of product, components and user interface herein are all schematic diagrams for reference only.
Due to possible upgrades of the product, there may be differences between the actual product and the
schematic diagram included herein.
When putting water into the kettle, do not exceed the rated max. water level;
otherwise, hot water may overflow or spout, causing scalding.
After water is boiled, do not continuously boil it to avoid dangers such as scald.
Move the electric kettle away from its power base before adding water. Wipe out the
water on the bottom of the electric kettle before placing it on its power base.
Make sure to disconnect the power supply when there is no water in the kettle, when
adding water, when the kettle is not in use, when cleaning or moving the kettle, and
when there is a fault with the kettle.
Do not heat up the kettle when there is no water in it. In Use
When the electric kettle is heated up without water inside, its function of dual dry
heating protection will stop heating to prevent the kettle from damage.
When any of the situations above occurs, pull the power plug out of the power
socket, and restart to use the electric kettle until it is cool sufficiently.
Do not cool the electric kettle directly with cold water, to avoid the reduction in
lifespan of its heating system. Dry Heating
Protection
Steam and heat will cause damage, discoloration and deformation to walls and
furniture, so please keep the electrickettle more than 30 cm away from walls and
furniture during use.
When operating the electric kettle in a kitchen cabinet or other similar places,
please ensure sufficient ventilation around. Environment
Abnormal heating of the power cord or power plug in use.
Other faults or abnormality. Fault or
Abnormality