Joy MagConnect VESA Quick Start Manual Download Page 3

Page: 3 / 4

Arm Installation

Assemble spring and lever

Insert base ball joint into arm

Thread on cap clockwise, do not fully insert

Insert the MagConnect / VESA ball joint

Turn lever clockwise until hand-tight

Push lever down

Always release the
lever to adjust parts

Insert screw into the end cap and fully tighten

down

Summary of Contents for MagConnect VESA

Page 1: ...MagConnect Ball Joint 38mm or 26mm VESA Ball Joint Always release the bracket to adjust parts Up to 3 wide Up to 3 height MagConnect Cases Module Compatible Not Included Compatible with VESA 75x75mm...

Page 2: ...uded Compatible with VESA 75x75mm 100x50mm and 100x100mm configurations hardware is not included MagConnect SKU MMU330 38mm MMU230 26mm VESA SKU MVU330 38mm MVU230 26mm Base Installation Content List...

Page 3: ...ll joint into arm 3 Thread on cap clockwise do not fully insert 2 Insert the MagConnect VESA ball joint 4 Turn lever clockwise until hand tight 5 Push lever down 6 Always release the lever to adjust p...

Page 4: ...confirm whether such mounts are legal in your state and if so any limitations on use of suction cup attachments to windshields Some states completely ban use of suction cup mounts to windshields in m...