Joy Sport CT-Explorer, Manual

Page: 36 / 52

STEP:6
PEDAL SUPPORT TUBE ASSY. (
二
)
NO PARTS LIST QUANTITY
STEP:7
UPPER SWING ARM HANDLEBAR ASSY.
NO PARTS LIST QUANTITY
STEP:8
FIX HANDLEBAR
NO PARTS LIST QUANTITY
STEP:9
CONSOLE ASSEMBLY
NO PARTS LIST QUANTITY
1) Remove both pre-assembled knobs (#102) from the
connecting tube (#86/#87)
2) Insert both pre-assembled connecting tube (#86/#87)
to each of swivel Tube (#69 & #70)
2) locking up both with knob (#102) as drawing shown
。
3) Finally, set end cap (#5 )cover the nut.
As photo shown
1) set the swing arm handle bar (#72 & #73) to both swivel tube (#69/#70)
2)
Note! Sticker R/L on the handlebars, turn the handlebar
on the aligned holes , secure both handlebar with
two screws (#18) and lock.
3) Finally cover both nuts with end cap (#5)
4
#98 2
#102 2
#18
#18 4
#5 4
1
E 4
#88(A/B)
#6 2
#59
As photo shown
1) connect cables comes out from console (#43) & cables from
the upright tube together.
Note! check & plug cables, same color to be plug together.
Black color can plug in with any black , no need to select
special plug.Make sure all plug firmly in then insert all
plugged cables to top of upright tube
.
2) set console (#43) to the top plate on the upright tube and
secure both with for screws (E)
1
As photo shown
1) Fit the fixed handlebar (#71) with the screws (#6) and thru the bracket hold
of upright tube with screw driver,
2) Set both EKG grip cables thru the small holes under the fie handlebar (#71)
on the upright tube.
3) Pick up the cables from top of the upright tube.
4) Secure the fix handlebar covers with screws ( #6)
Note! the cover (#88B) got a nut inject in the bar
JOYSPORT
www.joysport.nl9
9