Connection between a relay and the VAX1100
You must note among the usage with a relay that the relay must be
designed for the expected voltage and current in that specific
construction.
There are displayed 3 possible symbols which are designed for the
verification of the connection. These symbols have this meaning:
6. OPERATION
Wireless connection is successfully established
Corded connection is successfully established
Connection failed or is not connected
Key
Function
“OUT“
Hereby, you can switch the output. In order that it
works, the relay must be controlled.
“NCP“
Hereby, the protection against the negative current
can be activated. With “OK“ you can change the
value, if the value is “0“, the function is deactivated.
This function shifts the relay to interrupt the circuit.
“OCP“
Hereby, the protection against overcurrent can be
activated. With “OK“ you can change the value, if the
value is “0“, the function is deactivated. This function
shifts the relay to interrupt the circuit.
power
source
load
battery
charger
