Here you will connect the StromPi 2 via USB with the Raspberry
-
Pi and with that
it can output, depending of the connected voltage, a maximum current of 3A.
Additional to that you have the chance to get a higher current at the other USB
-
ports of the Raspberry
-
Pi.
Voltage control
At the StromPi you can find a with Test point which is marked with "T
-
Pin", with
it you can broadcast the status of the StromPi to the Raspberry
-
Pi.
It will be connected with a Jumper to the GPIO21 pin of the Raspberry
-
Pi by
default. If you want to use the GPIO21 pin for other things you have to remove
the Jumper. You can now connect the T
-
Pin with a free GPIO pin of the Raspber-
ry
-
Pi, for that you need a Pin
-
Connector cable.
If the StromPi switches into the battery mode, it can, with help of our software,
send you an e
-
mail or safely shutdown, to provide your recorded data from
being lost.
You will find the software at our download area from our website
www.joy
-
it.net
