2. SAFETY INSTRUCTIONS
The device must not be unsupervised. Separate the power supply (e.g. bat-
teries) if you are not using the device. This device is not a toy. It contains
swallowable small parts and it is not appropriate for children. Acrylic plates
can break at an overload.
The motors must not be blocked or overloaded. This can cause a great heat
development. The motor can generate heat during operation, so let the
motors cool down before you touch them. The kit is built for the use in dry
rooms, it must not be wet or moist. Strong solar radiation should be
prevented. Note also the safety instructions of the additionally purchased
components. Especially, during soldering is a high risk of burn injuries.
3. ASSEMBLY
Attention!
We recommend installing supply lines for the motors before the
assembly of the vehicle.
First, take the mounting plate and screw them onto the base plate with the
help of the enclosed mounting plate kit. The holes according to the base pla-
te of the Robot04 are marked on the mounting plate as
R3
.
