Joy-it JT-PSG9080 Flash Manual Download Page 2

Page: 2 / 5

2. FLASHING THE FIRMWARE

First, you need to download the software for flashing and the latest firm-

ware version, you can find it

Now connect your PSG9080 to your PC with a USB or TTL cable and

switch it on.

Now start the Firmware

Upgrade.exe.

Now select the

COM port

to which your signal generator is connected

and under

Open File

the path of your firmware to be installed. Then

press

Open Port

You should now see the following on the display of your signal generator:

To continue, press

on the numeric keypad of your PSG9080.

To cancel the operation, you can press

Summary of Contents for JT-PSG9080

Page 1: ...observe while starting up and using this product Should you encounter any unexpected problems during use please do not hesitate to contact us Only use the firmware versions published by Joy IT to flash your JT PSG9080 The firmware versions published by Joy IT are specifically adapted to the Joy IT JT PSG9080 and should never be used for other devices ...

Page 3: ...w you can click on Run to start the firmware upgrade After the successful upgrade you will see the following on your signal ge nerator Now press any button on your signal generator to complete the installati on Your signal generator will then switch off automatically ...

Page 4: ...sted below 1 Click on Close Port 2 Switch off your PSG9080 using the switch on the back of the device 3 Use the switch again to turn the device back on 4 Click on Open Port 5 Press 1 on the keypad of your signal generator 6 Click on Run The firmware upgrade should now start ...