Joy-it ESP8266-PROG Programming And Use Download Page 3

Page: 3 / 4

3. CONNECTION & PROGRAMMING OF ESP8266

Put now the ESP8266 in the yellow connector of the programming module

like shown in the picture.

Next to the yellow connector is a small switch (also shown in the

picture). Note that the switch should be on

Prog

if you want to program your

ESP8266. For the regular use, you must set the switch to

UART

Connect the programming module with the USB-interface of your computer.

If the automatic installation of drivers fails, you have to install the drivers

manually.

In this case download the

and install the

drivers. Note that the accurate port is selected in the Arduino settings.

The in the Arduino environment installed ESP-package provides some code

examples for the use of this module. These examples are highly

qualified for the entering into the programming of the ESP8266.

Summary of Contents for ESP8266-PROG

Page 1: ...1 GENERAL INFORMATION Dear customer thank you for choosing our product In the following we will show what you should note at the commissioning and during the usage Should you encounter any unexpected...

Page 2: ...ent environment for the use with the ESP8266 For that enter in the global settings of the program the following URL as an additional board manager URL http arduino esp8266 com stable package_esp8266co...

Page 3: ...e switch to UART Connect the programming module with the USB interface of your computer If the automatic installation of drivers fails you have to install the drivers manually In this case download th...

Page 4: ...e used batteries and accumulators which are not enclosed by the device Return options As the end user you can hand over with the purchase of a new device your old appliance which has essentially the s...