(5) To install the 2.5” HDD on the inner side of the Steel Front
Panel –
First, dismantle the Front Panel from the Chassis Frame.
Take out the 2.5” HDD Fixture Bracket (Steel Bracket Cover for
the Slim ODD’s Inlet) from the Accessory Box,
Fit 2 pcs of Shockproof Rubber Cushions into the widest apart
Circular Holes of the 2.5” HDD Fixture Bracket.
Break off and remove the 3-Circular
‘Punched-but-not-perforated’ Covers on the Front Steel Panel
of the Chassis Frame and, -
Insert 2 pcs of Shockproof Rubber Cushions in the widest
apart holes.
(6) Use 2 pcs of 6-32*L4 Flat Head Screws to secure the
2.5" HDD Fixture Bracket onto the Chassis Frame
(Blocking and covering the Slim ODD’s Inlet).
(7) Position the 2.5" HDD on the inner side of the Front Steel
Panel and align its bottom mounting screw holes.
(8) Take care to position the 2.5" HDD with its rear cable
connecting ports towards the Front I/O side.
