42
Fig. 14
3. Check that everything is level.
Positioning the burn chamber
Read the section on preparing the burn chamber for installation
in the Installation and Operating Instructions for the Jøtul I 520.
NB:
Read the instructions regarding pulling up or removing the
inner heat shield
(A)
.
Fig. 15
A
Fig. 16 - a
A
Fig. 16 - b
A
1. First remove the log retainer, air duct, inner bottom and then
lift the insulation sheet up. (See Fig. 13, 22, 23, 24 and 25 in the
manual for the Jøtul I
520
).
2. Before placing the burn chamber in the surround, unscrew
the two rear levelling screws
(A)
in the burn chamber to their
maximum length.
ENGLISH
