Jøtul Classic F 500 V3 Installation And Operating Instructions Manual Download Page 29

F 500 V3 Oslo   4 / 20

29

Some states do not allow the exclusion or limitation of 

incidental or consequential damages, or limitations on the 

length of implied warranties.  Therefore, the above exclusions 

or limitations may not apply to you.  This warranty gives you 

specific legal rights, and you may have other rights, which vary 

from state to state. 

JØTUL reserves the right to discontinue, modify or change 

the materials used to produce the Jøtul stove or fireplace.  

JØTUL shall have the right to replace any defective component 

with substitute components determined by JØTUL to be of 

substantially equal quality and price. 

The dollar value of JØTUL’s liability for breach of this warranty 

shall be limited exclusively to the cost of furnishing a 

replacement component.  JØTUL shall not in any event be 

liable for the cost of labor expended by others in connection 

with any defective component.  Any costs or expenses beyond 

those expressly assumed by JØTUL under the terms of this 

warranty shall be the sole responsibility of the owner(s) of the 

Jøtul or stove or fireplace.

No dealer, distributor, or other person is authorized to modify, 

augment, or extend this limited warranty on behalf of JØTUL.  

NO MODIFICATION OR CHANGE TO THIS WARRANTY WILL 

BE EFFECTIVE UNLESS IT IS MADE IN A WRITTEN DOCUMENT 

MANUALLY SIGNED BY AN AUTHORIZED OFFICER OF JØTUL.

An authorized installer may have been provided with certain 

information related particularly to the Jøtul or stove or 

fireplace; however, no authorized installer or other person who 

may service the appliance is an agent of JØTUL.  No inference 

should be made that JØTUL has tested, certified, or otherwise 

pronounced any person as qualified to install or service the 

appliance.  JØTUL shall not be liable or otherwise responsible 

for any error or omission by a person installing or servicing a 

Jøtul or stove or fireplace.

If you believe your Jøtul stove or fireplace is defective, you 

should contact your nearest authorized Jøtul dealer, who 

will process a warranty claim.  IN ORDER TO QUALIFY FOR 

WARRANTY COVERAGE, JØTUL MUST RECEIVE NOTICE OF A 

POSSIBLE DEFECT WITHIN SIXTY (60) DAYS OF THE DATE THE 

DEFECT IS FIRST DISCOVERED, OR REASONABLY COULD HAVE 

BEEN DISCOVERED.

This warranty is given by Jøtul North America, Inc., 

55 Hutcherson Drive, Gorham, Maine 04038 USA 

    

Return to: 

  Applied 

Ceramics 

 

 

Customer Service Department

 

5555 Pleasantdale Road

 

Doraville, GA 30340

 

(770) 448-6888 Main / (678) 735-4937 Direct

CUT

Name:  _________________________________________

Address: _______________________________________

City: ___________________________________________

State:______________________  Zip: _______________

Telephone ______________________________________

Date of Purchase: ________________________________

Place of Purchase:________________________________

APPLIED CERAMICS COMBUSTOR  WARRANTY  

 

 

                         REGISTRATION CARD

Dealer Address: ________________________________

______________________________________________

Stove Manufacturer: ____________________________

Stove Model ___________________________________

Jøtul High Flow™ Catalytic Combustor 158000 

20-Year Limited Warranty

 

 

J

øtul North America, Inc. warrants to the consumer who 

purchases a Jøtul High Flow™ Combustor as a component 

in an EPA-Certified Jøtul solid fuel appliance, 100% against 

defects in materials and workmanship for a period of 20-years 

from the date of purchase.  

 

Conditions and Exclusions:

 

1)    The Jøtul High Flow™ Combustor 20-Year Warranty is to  

 

the original purchaser of the Jøtul wood stove or insert  

 

and is non-transferable.

2)    The Jøtul High Flow™ Combustor 20-Year Warranty does  

 

not apply to any other component of the Jøtul wood stove  

 

or insert.

 

3)    The Jøtul High Flow™ Combustor 20-Year Warranty covers  

 

replacement of the original Jøtul High Flow™ Combustor  

 

due to defects in material and workmanship.

 

4)    Return the defective combustor to your local Jøtul    

 

Authorized Dealer who will submit a warranty claim on  

 

your behalf.  All claims must be accompanied by a proof  

 

of purchase showing the name of the selling dealer, date  

 

of purchase, Jotul stove or insert model and serial number.  

 

Retain your sales receipt for your records.

 

5)    Related cost of replacement such as installation, travel,  

 

and shipping are excluded.

 

6)    Return of the original Jøtul High Flow Combustor™ to Jøtul  

 

North America may be requested.

 

7)    Any subsequent replacement Jotul High Flow™ Combustor  

 

is not covered under this original warranty. Subsequent  

 

claims will be covered by the Applied Ceramics, Inc.    

 

combustor warranty. See contact and claim information  

 

below and on the next page.

  

Summary of Contents for Classic F 500 V3

































Reviews: