LIMITED WARRANTY
Kodiak Mobile by Jotto Desk will repair our docking station product with new
or rebuilt parts, free of charge in the U.S.A. for three (3) years from the date
of original purchase in the event of a defect in materials or workmanship.
This warranty includes the metal case and internal power supply / port
replicator circuitry, but excludes all other options or accessories, which are
covered by the respective manufacturer of those options or accessories.
This warranty is extended solely to the original purchaser. A purchase
receipt or other proof of date of original purchase and a Kodiak Mobile
SO# will be required before warranty performance is rendered.
This warranty only covers failures due to defects in materials or
workmanship which occur during normal use. It does not cover damage
which occurs in shipment or failures which are caused by products not
supplied by Kodiak, or failures which result from alteration, accident,
misuse, introduction of liquid or other foreign matter into the unit, abuse,
neglect, installation, maladjustment of consumer controls, improper
maintenance, modification or service by anyone other than Kodiak
Mobile by Jotto Desk or an authorized Kodiak Mobile by Jotto Desk
Service Authorized Dealer, or damage that is attributable to acts of God.
Exclusions and Limits:
There are no other express warranties except as listed above.
KODIAK MOBILE BY JOTTO DESK SHALL NOT BE LIABLE FOR LOSS
OF DATA OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT
OF ANY BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED
WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE
APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
If you experience a problem with your Kodiak Mobile by Jotto Desk
product during or after your warranty period please contact us at
877.455.6886.
DESCRIPTION
Rugged in-vehicle “intelligent” docking station with internal port
replicator / power supply with auto shutdown / auto activation
capability.
WARNINGS
Do not use bolts longer than 3/8” to bolt docking station to
clevis or pedestal mount. Only use 1/4”-20 x 3/8” grade 8
bolts to secure dock to clevis/pedestal mount. Consult vehicle
manufacturer prior to installation for air bag deployment
zones. Do not install this unit in the driver or passenger air bag
deployment zones.
Only use appropriate mounting hardware that can securely
support the weight of this docking station and computer. Failure
to comply can result in serious injury or death.
FEATURES
1. INTERNAL PORT REPLICATOR
A. COM 1 serial
B. COM 2 serial
C. Video OUT port
D (5) USB 2.0 ports
E. Keyboard / Mouse port
F. Ethernet port 10/100 BASE_T
G. Mic IN
H. Speaker OUT
2. INTERNAL POWER SUPPLY
A. 15.7v DC output charging circuit
B. User selectable auto shutdown timer
C. Microprocessor control
D. Power Indicator
E. Docked Indicator
F. Low Volt Indicator
G. Auto Shutdown Warning Indicator
H. Auto Shutdown output trigger
PORT DIAGRAM
Diagram of the port layout located on the bottom of docking station.
ETHERNET USB 2.0 USB 2.0 SERIAL MIC SPKR KBD VIDEO DC IN
A
B
DOCKING STATION DIAGNOSTICS
The 120w Power Supply board has built-in power indicator LED’s that can
help you determine if the docking station is functioning properly. To access
the required area of the board, remove the access panel, located on left side
of the dock. The indicators are color coded and indicate if specific functions
are either receiving input power or producing output power.
Example:
If the +12vDC ignition circuit is not connected or the ignition fuse is blown
the Orange LED will not be illuminated. By simply observing the state of the
LED you can quickly determine if the docking station is receiving voltage or
not.
LED INDICATOR COLOR CODES:
INPUT POWER
LED COLOR
REF
+12vDC (un-switched power, or A+)
RED
D1
+12vDC (switched, or ignition power)
ORANGE D7
OUTPUT POWER
+15.7vDC (laptop charging circuit) GREEN
D6
+5vDC (USB, Ethernet power circuit)
YELLOW D2
All four LED’s should be illuminated when the docking station is powered
up. If you don’t see all four LED’s there is a situation that is preventing the
docking station from functioning properly. Please use the chart below to
determine the cause and effect of the described situations:
1. Laptop computer won’t charge. Check to see if the GREEN LED is illuminated.
If it’s not, check Output Fuse.
2. Docking station turns on for a brief moment, then shuts down. Check to
see if the ORANGE LED is illuminated. If it’s not, check the Ignition Fuse
and check to be certain 12v is present at this circuit.
(This condition may
vary depending on the settings of your shutdown timer. The docking station
will power up and then start the shutdown timer. Docking station will remain
powered up for the pre-set time then shut down if the Ignition Fuse is blown.)
3. Docking station will not power up at all. Check to see if the RED LED is
illuminated. If it’s not, check Main Power Fuse and check to be certain that
12v is present at the circuit.
Laptop must be docked.
4. Ethernet will not function. Check to see of the YELLOW LED is illuminated.
If the LED is illuminated and the Ethernet will not work, you may need to
install the Ethernet driver into your computer.
Drivers are available on the
Kodiak web site. CF30 MK2 and CF31 notebooks should not require a driver
install, but Getac B300 and CF30 MK1 and older computers will require the
driver install.
SPECIFICATIONS
MOUNTING:
Mounting Pattern (Standard) 4.250 x 2.000
4.000 x 2.000
Dimensions:
11.945W x 10.07L x 1.5H
Weight:
8.4 lbs.
GENERAL:
Construction:
18g welded steel
Keyed Alike:
Yes
Finish:
Powder Coat - Black/Silver
FIRMWARE:
Revision:
7
*Laptop must be docked for
docking station to power.
POWER SUPPLY:
Input Voltage:
9v - 16v DC
Output Voltage:
15.7v DC regulated @ 120W
Output Amp (Charging):
10A Max
Output Trigger:
400mA Max
Surge Suppression:
Yes
Input Fused (BATT):
15A ATM
Input Fused (IGN):
7.5A ATM
Output Fused:
10A mini blade
Reverse Voltage Protection: Yes
Avalanche Voltage Protection: Yes
Un-Switched 12v Access:
Yes (keyboard light)
PORT REPLICATOR:
Noise Filtering:
Yes
EMI Filtering:
Yes
Serial:
9 Pin D-Sub, Male
Keyboard:
6 Pin Mini-DIN
USB:
USB, type A
Microphone:
Mono phono jack, 3.5mm DIA.
Speaker:
Stereo phono jack, 3.5mm DIA.
Ethernet:
RJ45
Video:
15 pin D-sub, female
