jotron Tron 40VDR, User Manual

Page: 2 / 44

2
Tron 40VDR
MANUAL OPERATION AND ACTIVATION
It is not recommended to operate the beacon inside a life raft or under a cover or
canopy. Do NOT tie the lanyard to the ship in distress, as this will prevent the unit to
functioning if the ship sinks.
1. Remove the locking pin from bracket cover
2. Remove the cover
3. Take out the EPIRB from the bracket
4. Break the seal and pull the locking pin holding the main activator switch
5. Push slider to move switch to ON position
6. Tie the beacon lanyard to you or to the survival craft
7. The strobe light, will start flashing indicating that the EPIRB is operating
If possible keep the EPIRB in an open area, away from any metal objects
(ship construction etc.) that may limit the satellite coverage. Transmission can be
stopped by taking the EPIRB out of water and turning the switch to READY position.
WARNING: Use only during situations of grave and imminent danger.