84417_O&I_TR-810_C
Operating Instructions
Page 5-5
5.5
Setting, information and configuration menus – transceiver
Under the menu selection from the transceiver Ctrl menu, various submenus are available
for the non-restricted users and Technician. The submenus and details for them are shown
in the tables below.
Menu
Submenu
Description
RX settings
►
Ext. Speaker
AAGC
Noise Blank
Squelch
Access to configuration parameters for:
- External speaker (Balance between internal and
external speaker if both are selected. See Audio menu).
- AAGC on/off setting
- Noise blanking level adjustment
- Squelch operation level adjustment
TX settings
►
TX Power
Time Out
Modulation
Access to configuration parameters for:
- TX output power setting
- Timeout setting
- Modulation level setting
Channel setup ►
Sel.Visibility
Sel.Rx only
Freq and name
No of channels
25KHz step
Access to configuration parameters for :
- Setting the channels visible for the restricted user
- Configure a channel as a receiver only channel
- Setting the frequency and names of the channels
- Setting the number of channels for the transceiver (≤ 63)
- Selecting 25KHz step also as a 8.33KHz transceiver
Audio ►
Headphone
Sidetone levl
Mic Rear
Ex. Speaker
Access to configuration parameters for :
- Headphone
- Side-tone level
- Mic Rear on/off
- Tracking and muting of External speaker.
Bite ►
Displays information about a number of selected critical
parameters inside the transceiver. For details regarding
information, refer to chapter 5.7.
Password ►
Access to change password
Table 5.5-1, Submenus available on the transceiver
Summary of Contents for TR-810
Page 32: ......