Doc. No.: 103839 Rev. A
jotron.com
Page 45 of 104
8.3.2
Transponder
In order to connect all sensors and external connections to the Transponder Unit, the lid must be removed by
removing the screws on top of the unit. Pay attention to the seal gasket on the inside of the lid and the small o-ring
positioned on the center screw. These gaskets need to be in place when mounted in order to keep the unit
waterproof. When the lid is off, the connections to sensors, ECS etc can be made. The inner lid shall not be
removed by user.
Figure 8-12 Transponder with lid removed, lid screws highlighted
Summary of Contents for 103660
Page 1: ...Tron AIS TR 8000 MkII AIS Class A Inland AIS Transponder Operator and Installation Manual...
Page 2: ......
Page 103: ......
