7
www.jotoimagingsupplies.com 1-800-565-5686 Blaine, WA | Las Vegas, NV | Antioch TN | Coquitlam, BC | Brampton, ON
Setting Up Your Mug Press
Turning On Your Mug Press
Turn the Main Power Switch ON. The
Main Power Switch is at the right/Left side
of the heat press.
Current temperature will display. Usually has the value
“LO”, indicating low temperature.
How to Read The Display
1.) If a number value shows on this display and no lights
are on in either of the middle three slots, mug press is
displaying the current temperature.
2.) If the display has a value of “LO” it means low
current temperature (under 200˚F (93˚C)).
Setting Press Temperature
1.) Press OK to start for 2 seconds. Use the up and down
arrows to choose to display in °F or °C.
°F stands for Fahrenheit
°C stands for Celsius
2.) Once you select Fahrenheit or Celsius, press OK to save.
3.) Use the arrow to change the value of the set
temperature. The left light in the middle is on to
indicate you are in the set temperature mode.
Setting Press Time
Press the OK button to save the set temperature value
Now change the set time value with the up and down
arrows. Please note, the set time is in seconds.
The middle light in the middle is lit to indicate you are
in the set temperature mode. Now Press OK to save
the set time value.
Wait until the current temperature is the same as the set
temperature before using. The press will beep once set temperature is reached.
Close and open the press to stop the beeping.
Note: This mug press should not be set to exceed 400˚F (200˚C). Setting the press temperature
to above 400˚F (200˚C) will burn out your mug element and may cause a fire hazard.